Self-made plow for plowing the land

A self-made plow is a universal invention that is suitable for both plowing and planting potatoes. The plow can be made independently of the available materials. The proposed plow model consists of a control unit and a device intended for plowing (plow). The control unit is a stand, which consists of the main control elements and accessories. Namely:
1 - rectifier bridge (power supply).
2 - electric motor.
3 - gearbox combined with gear.
4 - cable - 5 mm, acting as a winch.
5 - anchor (working part from a shovel).
Self-made plow for plowing the land

A plow that is designed for plowing the land consists of the following elements:
1 - steering wheel (plow control lever).
2 - share.
3 - base with mounts.
base with mounts

Installation and connection of the plow.
1. Anchor must be set at an angle for a better stop.
at an angle for a better stop

2. After that, the anchor should be deepened into the ground to the connecting strip.
deepen into the ground

3Then the anchor is attached to the control device using a piece of reinforcement.
connect to control device

4. Before retaining bar near the cable also drive in rebar. It will additionally hold the control unit in place during operation.
Self-made plow for plowing the land

5. In the working position, the gearbox is in the engaged position.
Self-made plow for plowing the land

6. The control unit is ready for operation.
Self-made plow for plowing the land

7. After installing and securing the control device, a plow should be attached to it. For this, the free end of the cable is attached to the base of the plow.
Self-made plow for plowing the land

Principle of operation and work.
1. Plow carried to the desired distance.
2. The plow is driven into the ground to the required depth.
Self-made plow for plowing the land

3. The left foot is set on the plowshare, and the right foot rests on the ground.
Self-made plow for plowing the land

4. Thus, while the plow is moving along the ground, the plowman pushes off with his right foot and controls the plow with his weight.
Self-made plow for plowing the land

5. During operation, the wheel of the plow must not exceed the level of the tiller's belt.
Self-made plow for plowing the land

6. When the plow reaches the end of plowing, the control unit is switched off and the plow is again placed on the opposite side of the plot. A plow made on this principle is able to plow the land, which for a long time was without care.
plot

The plowed land has even and deep grooves.
plowed plot

After plowing the land should be treated with a harrow. This is done to break ground blocks. For this, instead of a plow, a harrow is attached to the control unit.
attach harrow

Overwhelm the ground on the same principle as plowing.
harrow

The end result is an almost flat piece of land suitable for use.
Self-made plow for plowing the land

Related news

Self-made plow for plowing the land image, picture
Self-made plow for plowing the land 71


Self-made plow for plowing the land 99


Self-made plow for plowing the land 24


Self-made plow for plowing the land 34


Self-made plow for plowing the land 89